[omniNotify] RE: [omniORB] omniORB 4.0.3 port to Linux RHel WS on x86 64bit arch

[Frederic Prin]

Thanks!

I just saw that you are right! I changed of compiler version to 
/usr/bin/gcc -v
Reading specs from /usr/lib/gcc-lib/x86_64-redhat-linux/3.2.3/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
--infodir=/usr/share/info --enable-shared --enable-threads=posix
--disable-checking --with-system-zlib --enable-__cxa_atexit
--host=x86_64-redhat-linux
Thread model: posix
gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)

/usr/bin/g++ -v
Reading specs from /usr/lib/gcc-lib/x86_64-redhat-linux/3.2.3/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
--infodir=/usr/share/info --enable-shared --enable-threads=posix
--disable-checking --with-system-zlib --enable-__cxa_atexit
--host=x86_64-redhat-linux
Thread model: posix
gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)

It autoconf rights now!



-----Original Message-----
From: Harri Pasanen [mailto:harri.pasanen at trema.com] 
Sent: mercredi 23 juin 2004 10:59
To: Frederic Prin; omniorb-list at omniorb-support.com
Cc: omninotify-list at omniorb-support.com
Subject: Re: [omniORB] omniORB 4.0.3 port to Linux RHel WS on x86 64bit
arch


I suggest you first install gcc 3.3.3, (or even gcc 3.4.x), those have a
lot better C++ and AMD64 support. It should autoconfigure pretty much
out of the box then, if not, look at config.log to see where it failed.
If you install gcc to /opt/gcc33, then for config: $
CC=/opt/gcc33/bin/gcc CXX=/opt/gcc33/bin/g++ ./configure


-Harri

On Wednesday 23 June 2004 10:10, Frederic Prin wrote:> Hi all,>> Is
someone tried to port omniORB 4.0.3 (and moniNotify) to this new>
platform (Rhel WS/ x86 64 bit AMD CPU) ?>> 	rhel3-64b{ config }:71 >
uname -a> 	Linux rhel3-64b 2.4.21-4.EL #1 Fri Oct 3 17:39:19 EDT
2003> x86_64 x86_64 x86_64 GNU/Linux>> 	rhel3-64b{ config }:72 > cat
/etc/redhat-release> 	Red Hat Enterprise Linux WS release 3 (Taroon)>>
At this time I failed to build with autoconf  due to gcc 2.8.1 that> is
checked has unable to create executable:>> 	rhel3-64b{ .. }:84 >
./configure>
--prefix=/main/tmp/fredp/omni/omniORB-4.0.3-i386-linux-rh3-64>
--disable-thread-tracing PYTHON=/opt/local/bin/python> 	checking build
system type... x86_64-unknown-linux-gnu> 	checking host system
type... x86_64-unknown-linux-gnu> 	checking for gcc... gcc>
checking for C compiler default output... configure: error: C> compiler
cannot create executables>> Is someone knows what kind of build to use:
autoconf or manual ?> - If manual, what is the closest platform I can
uncomment in> config.mk and what compiler flag should I use in>
/mk/platforms/platform.mk - if autoconf what CC, CPP and LD should> I
pass to ./configure ?>> Thanks very much.>> Fred>>
(>      Frédéric Prin          )>      Senior Software Engineer />
S I L V A C O      (>      Grenoble REsearch CEnter \>      Tel 04 56 38
10 33        )>     __________________________/___>
/__/__/__/__/__/__/__/__/__/__/>   /__/__/__/__/__/__/__/__/_____/>
/__/__/__/__/__/__/__/__/__/__/


This message, including any attachments, is intended only for the
person(s) to whom it is addressed. If you received it in error, please
let us know and delete the message from your system. This message may be
confidential and may fall under the duty of non-disclosure. Any use by
others than the intended addressee is prohibited. Trema shall not be
liable for any damage related to the electronic transmission of this
message, such as failure or delay of its delivery, interception or
manipulation by third parties, or transmission of viruses or other
malicious code.