[omniORB] Timeout problems
Giga Giguashvili
gregoryg@ParadigmGeo.com
Wed, 29 Mar 2000 16:53:56 +0200
--------------C98A7CE9C3082A67F7EA070E
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hello,
I have OMNI 2.8 ported for SGI platform which is using sprocs instead of
pthreads.
I encountered some problems with timeouts on connections. After little
debugging I
found out that shutdown function never gets called, even if I had set
timeout through
the command line or function.
I wanted to ask where to start looking for the problem, which module to
your opinion
might cause such a problem.
Thank you in advance,
Giga
--------------C98A7CE9C3082A67F7EA070E
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
<font color="#000000">Hello,</font><font color="#000000"></font>
<p><font color="#000000">I have OMNI 2.8 ported for SGI platform which
is using sprocs instead of pthreads.</font>
<br><font color="#000000">I encountered some problems with timeouts on
connections. After little debugging I</font>
<br><font color="#000000">found out that shutdown function never gets called,
even if I had set timeout through</font>
<br><font color="#000000">the command line or function.</font><font color="#000000"></font>
<p><font color="#000000">I wanted to ask where to start looking for the
problem, which module to your opinion</font>
<br><font color="#000000">might cause such a problem.</font><font color="#000000"></font>
<p><font color="#000000">Thank you in advance,</font>
<br><font color="#000000">Giga</font>
</body>
</html>
--------------C98A7CE9C3082A67F7EA070E--