[omniORB] performance

[Craig Rodrigues]

On Fri, Mar 16, 2001 at 11:20:45AM +0100, Alexandre Denis wrote:
> Nicolas Leclercq wrote:
> > 
> > > I am looking for the fastet method
> > > (regarding bytes per sec) for transferring
> > > bulk data via omniORB.
> > > What is the peak performance achievable (using a
> > > 100 Mbit ethernet)?
> > 
> > On my 100 Mb-full duplex(host-to-host)-ethernet network the server (a
> > Bi-PIII-500Mhz-NT4) sends a  980.5 Kb image (a sequence of bytes) to the
> > client (a Notebook-PIII-700Mhz-NT5) at up to 76.6 Mb/s (0.1s/image). The
> > average transfer rate is about 66 Mb/s. Both the client and the server run
> > omniORB 3.03.
> > Hope this will help.
> > Nicolas.
> 
> Hi,
> 
> On ethernet-100, bi-PII-450 linux, running omniORB 3.0.2, I get a
> transfer rate up to 93Mb/s.
> 
> My modified version of omniORB 3.0.2 runs at about 550Mb/s on SCI and
> 640Mb/s on Myrinet.
> 
> Alexandre.
> 
Do you have the test that you used to obtain this measurement?
I'd like to do similar benchmarking on my network.
-- 
Craig Rodrigues        
http://www.gis.net/~craigr    
rodrigc@mediaone.net