[omniORB] Installing and Configuring omniORB 4.0.0 on MacOS X 10.2.2

[bido@mac.com]

SETUP INSTRUCTIONS FOR OmniORB 4.0.0 on MacOS X 10.2.2 (Jaguar with 
Developer Tools Installed)

1. DOWNLOAD omniORB-4.0.0.tar INTO A DIRECTORY OF CHOICE.  I CHOSE 
/usr/local/corba

2. FROM THE COMMAND LINE

$cd /usr/local/corba
$tar -xvf omni*
$ cd /usr/local/corba/omniORB-4.0.0
$ mkdir build
$ cd build
$ ../configure --disable-static --enable-thread-tracing 
--with-openssl=/usr
$ make
$ make install

3. USE THE PROVIDED SAMPLE CONFIGURATION FILE  AS A STARTING POINT

$cd /usr/local/corba/omniORB-4.0.0
$cp sample.cfg omniORB.cfg

4. ADD THE FOLLOWING TO YOUR ENVIRONMENT (I'M USING THE TCSH SHELL)

setenv OMNINAMES_LOGDIR /usr/local/corba/omniORB-4.0.0/build/logs
setenv DYLD_LIBRARY_PATH /usr/local/corba/omniORB-4.0.0/build/lib
setenv DYLD_BIND_AT_LAUNCH 1
setenv OMNIORB_CONFIG /usr/local/corba/omniORB-4.0.0/omniORB.cfg
set path = ($path /usr/local/corba/omniORB-4.0.0/build/bin)

5. BUILD AND RUN THE ECHO EXAMPLE

$cd /usr/local/corba/omniORB-4.0.0/build/src/examples/echo
$ make
$ ./eg1

6. ENJOY!