[omniORB] Network question

[John, Gareth (Poole)]

I have the same problem on Windows 2000. When omninames initialises its
confutation files it seems to keep the IP address, so when you are off the
network and using the local loop-back address of 127.0.0.1 then the naming
service will not run. You can re-initialise the config-files
omninames-machinename.log and .bak (after saving them) with:-
Omninames -start 2809 -logdir 'your-path-here' 
And it will work until you go back on the network when you will need the
original config files again. I don't' know if there is a better solution
that does not involve swapping files and re-starting.

 -----Original Message-----
From: 	jorgefm@cirsa.com [mailto:jorgefm@cirsa.com] 
Sent:	Friday 17 January 2003 02:06 PM
To:	omniorb-list@omniorb-support.com
Subject:	[omniORB] Network question

Hi all !

I have installed omniORB 4.0 and i'm using the omniNames to locate the
objects.

I have a problem when trying to run a server application if i unplug
the ethernet cable.

I have try configuring the ORB with socket UNIX endPoints not TCP but
no success. Do you have to have a network connection running ? I only
want to have the loopback enabled, is it possible ? Must i have run the
omniNames with some special argument ?

Thanks,
Jorge
____________________________________________________________________________
____
  Este mensaje se dirige exclusivamente a su destinatario y puede contener
información CONFIDENCIAL sometida a secreto profesional o cuya divulgación
esté prohibida en virtud de la legislación vigente. Si ha recibido este
mensaje por error, le rogamos que nos lo comunique inmediatamente por esta
misma vía o por teléfono (34 93 739 67 00) y proceda a su destrucción.
Nótese que el correo electrónico vía Internet no permite asegurar ni la
confidencialidad de los mensajes que se transmiten ni la correcta recepción
de los mismos.  En el caso de que el destinatario de este mensaje no
consintiera la utilización del correo electrónico vía Internet, rogamos lo
ponga en nuestro conocimiento de manera inmediata.    This message is
intended exclusively for its addressee and may contain information that is
CONFIDENTIAL and protected by a professional privilege or which disclosure
is prohibited by law. If this message has been received in error, please
immediately notify us via e-mail or by telephone (34 93 739 67 00) and
delete it. Please note that Internet e-mail does not guarantee the
confidentiality or the proper receipt of the messages sent.  If the
addressee of this message does not consent to the use of Internet e-mail,
please communicate it to us immediately.
____________________________________________________________________________
_____



_______________________________________________
omniORB-list mailing list
omniORB-list@omniorb-support.com
http://www.omniorb-support.com/mailman/listinfo/omniorb-list


Siemens Plc 
Registered office: Siemens House, Oldbury, Bracknell, Berkshire, RG12 8FZ. 
Registered no: 727817, England. 

This communication contains information which is confidential and 
may also be privileged. It is for the exclusive use of the addressee. 
If you are not the addressee please note that any distribution, 
reproduction, copying, publication or use of this communication 
or the information in it is prohibited.  If you have received this 
communication in error, please contact us immediately and also 
delete the communication from your computer.