Re: Re: Re: [omniORB] Porting of omniORB over RTOS

[binod pal]

Hi,

I had build the omniORB library on INTEGRITY and i tried to run the simple echo example over it(client and server collocated). The application is running but, i am not getting any output. For the debugging purpose i set the traceLevel = 25. Can someone figure out from the output 

I/O: omniORB: My addresses are: 
I/O: omniORB: Maximum supported GIOP version is 1.2
I/O: omniORB: Native char code sets: ISO-8859-1 UTF-8.
I/O: omniORB: Transmission char code sets: ISO-8859-1(1.2) ISO-8859-1(1.1) ISO-8859-1(1.0) UTF-8(1.2) UTF-8(1.1).
I/O: omniORB: Native wide char code sets: UTF-16.
I/O: omniORB: Transmission wide char code sets: UTF-16(1.2).
I/O: omniORB: Information: the omniDynamic library is not linked.
I/O: omniORB: Current configuration is as follows:
I/O: omniORB:   DefaultInitRef (file) = 
I/O: omniORB:   DefaultInitRef (args) = 
I/O: omniORB:   abortOnInternalError = 0
I/O: omniORB:   abortOnNativeException = 0
I/O: omniORB:   acceptBiDirectionalGIOP = 0
I/O: omniORB:   acceptMisalignedTcIndirections = 0
I/O: omniORB:   bootstrapAgentHostname = 
I/O: omniORB:   bootstrapAgentPort = 900
I/O: omniORB:   clientCallTimeOutPeriod = 0
I/O: omniORB:   clientConnectTimeOutPeriod = 0
I/O: omniORB:   clientTransportRule = * unix,ssl,tcp
I/O: omniORB:   configFile = 
I/O: omniORB:   connectionWatchImmediate = 0
I/O: omniORB:   connectionWatchPeriod = 50000
I/O: omniORB:   copyValuesInLocalCalls = 1
I/O: omniORB:   diiThrowsSysExceptions = 0
I/O: omniORB:   dumpConfiguration = 0
I/O: omniORB:   endPoint = giop:tcp::
I/O: omniORB:   endPointPublish = addr
I/O: omniORB:   giopMaxMsgSize = 2097152
I/O: omniORB:   giopTargetAddressMode = KeyAddr
I/O: omniORB:   id = omniORB4
I/O: omniORB:   idleThreadTimeout = 10
I/O: omniORB:   immediateAddressSwitch = 0
I/O: omniORB:   inConScanPeriod = 180
I/O: omniORB:   lcdMode = 0
I/O: omniORB:   maxGIOPConnectionPerServer = 5
I/O: omniORB:   maxGIOPVersion = 1.2
I/O: omniORB:   maxInterleavedCallsPerConnection = 5
I/O: omniORB:   maxServerThreadPerConnection = 100
I/O: omniORB:   maxServerThreadPoolSize = 100
I/O: omniORB:   maxSocketRecv = 2147483647
I/O: omniORB:   maxSocketSend = 2147483647
I/O: omniORB:   nativeCharCodeSet = ISO-8859-1
I/O: omniORB:   nativeWCharCodeSet = UTF-16
I/O: omniORB:   objectTableSize = 0
I/O: omniORB:   offerBiDirectionalGIOP = 0
I/O: omniORB:   oneCallPerConnection = 1
I/O: omniORB:   outConScanPeriod = 120
I/O: omniORB:   poaHoldRequestTimeout = 0
I/O: omniORB:   poaUniquePersistentSystemIds = 1
I/O: omniORB:   principal = [Null]
I/O: omniORB:   resetTimeOutOnRetries = 0
I/O: omniORB:   scanGranularity = 5
I/O: omniORB:   serverCallTimeOutPeriod = 0
I/O: omniORB:   serverTransportRule = * unix,ssl,tcp
I/O: omniORB:   socketSendBuffer = -1
I/O: omniORB:   strictIIOP = 1
I/O: omniORB:   supportBootstrapAgent = 0
I/O: omniORB:   supportCurrent = 1
I/O: omniORB:   supportPerThreadTimeOut = 0
I/O: omniORB:   tcAliasExpand = 0
I/O: omniORB:   threadPerConnectionLowerLimit = 9000
I/O: omniORB:   threadPerConnectionPolicy = 1
I/O: omniORB:   threadPerConnectionUpperLimit = 10000
I/O: omniORB:   threadPoolWatchConnection = 1
I/O: omniORB:   traceExceptions = 1
I/O: omniORB:   traceFile = [stderr]
I/O: omniORB:   traceInvocationReturns = 0
I/O: omniORB:   traceInvocations = 0
I/O: omniORB:   traceLevel = 25
I/O: omniORB:   traceThreadId = 0
I/O: omniORB:   traceTime = 0
I/O: omniORB:   unixTransportDirectory = /tmp/omni-%u
I/O: omniORB:   unixTransportPermission =  777
I/O: omniORB:   useTypeCodeIndirections = 1
I/O: omniORB:   validateUTF8 = 0
I/O: omniORB:   verifyObjectExistsAndType = 1
I/O: omniORB: Initialising incoming endpoints.
I/O: omniORB: Instantiate endpoint 'giop:tcp::0'
I/O: omniORB: Unable to create pipe for SocketCollection.
I/O: omniORB: Bind to address 0.0.0.0 ephemeral port.
I/O: omniORB: Failed to bind to address 0.0.0.0 ephemeral port.
I/O: omniORB: Error: Unable to create an endpoint of this description: giop:tcp::0
I/O: omniORB: throw INITIALIZE from objectAdapter.cc:436 (NO,INITIALIZE_TransportError)
I/O: Caught CORBA::INITIALIZE
I/O: omniORB: ORB not destroyed; no final clean-up.

that what is going wrong here.

Regards
Binod Pal


On Thu, 09 Sep 2010 19:11:50 +0530  wrote
>

On Thu, Sep 9, 2010 at 8:29 AM, binod pal  wrote:


Hi,

I would like to clarify that UserException is not a macro, it is a class. I had tried two options

 
 
UserException is a macro in INTEGRITY_error.h, at least in the INTEGRITY that I am using (5.0.11 and 5.0.10).
 
I suspect this macro is colliding with a class in omniORB (and any other ORB). In my version of INTEGRITY_error.h they have it wrapped in an #ifdef like so:
 
/* Unfortunately, ORBExpress defines a class UserException which causes       */
/* compilation failures, so this macro/API must be disabled.        */
#ifndef ORBEXPRESS
# define UserException(TheTask, Type) \

 __UserException(TheTask, Type, __FILE__, sizeof(__FILE__), __LINE__)
#endif
 
You could try #defining ORBEXPRESS or adding another check for omniORB.

BN



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100930/d699134a/attachment.htm